CNC Machining Blog - Tips and Tricks for Machinists

Welcome to the Hurco CNC machine tool blog. Subscribe for weekly posts on high-speed and 5-axis machining, workholding, the latest control technologies, plus Hurco tips-and-tricks…just to name a few.

5-Axis CNC Programming: Rotary Angles or Tool Vectors?

Mike Cope Mon, Jun 24, 2013
5-Axis CNC Programming: Rotary Angles or Tool Vectors?

When programming in 5-axis, we have two distinct options that we can use to command rotary moves and positions. We can output the data using either rotary angles or tool vectors. Although each one has its pros and cons, I prefer to configure a postprocessor to output these rotary commands as IJK tool vectors, instead of the more common ABC-axis rotary angles.

Restart Program Where You Left Off with Hurco Recovery Restart

Mike Cope Fri, Jun 14, 2013
Restart Program Where You Left Off with Hurco Recovery Restart

Have you ever had to abruptly stop your machine in the middle of running a program and wished there was a way to restart the program exactly where you left off, even if you were in the middle of all that code? With Hurco’s Recovery Restart feature, you can!

Helpful Job Shop Products for Machinists

Mike Cope Fri, Jun 07, 2013
Helpful Job Shop Products for Machinists

As machinists, we are all aware of the standard tools of our trade. However, there are other non-standard tools available that not everyone is aware of and could be very helpful in our day-to-day life in the job shop. Just like any other industry, if there is a time consuming and mundane procedure that must be completed, you can bet that somewhere there is someone who has already invented a tool or device that would make that task easier.

Here is a list of helpful products for machinists that addresses workholding, fixture building, part and tool setup, coolant nozzles and more:

Subscribe to the Machinists Blog