CNC Machining Blog

Maggie Smith

Recent Posts

Veterans Day Video 2016

Posted by Maggie Smith on Fri, Nov 11, 2016

I'm acting as guest blogger for Mike Cope today because he took a vacation day to honor veterans as he has done each Veterans' Day for the past 17 years with his best buddy and Navy veteran Dave. Mike has many interests, but he is passionate about patriotism and serving veterans and active duty military personnel. Therefore, he takes November 11th seriously...it is just one of the days during the year that he gives back to local veterans through honor and service.

Professionally, Mike is the go-to guy when it comes to understanding how the Hurco control makes machinists more productive and shops more profitable. He knows the control inside and out, and helps all of us make sure the end user understands the value of the multitude of software features WinMax provides. 

Read More

Tags: WinMax Conversational Programming, NC / G-Code Programming, control technology

Veteran's Day Video

Posted by Maggie Smith on Wed, Nov 11, 2015

I'm acting as guest blogger for Mike Cope today because he took a vacation day to honor veterans as he has done each Veteran's Day for the past 16 years with his best buddy and Navy veteran Dave. Mike has many interests, but he is passionate about patriotism and serving veterans and active duty military personnel. Therefore, he takes Veteran's Day seriously...it is just one of the days during the year that he gives back to local veterans through honor and service. Professionally, Mike is the go-to guy when it comes to understanding how the Hurco control makes machinists more productive and shops more profitable. He knows the control inside and out, and helps all of us make sure the end user understands the value of the multitude of software features WinMax provides. 

Read More

Tags: WinMax Conversational Programming, NC / G-Code Programming, control technology

Hi-Jacking Mike's Blog: should you buy new or used? What's the ROI of training?

Posted by Maggie Smith on Mon, Apr 06, 2015


INTRODUCTION:

Hi...I'm Maggie and I'm hi-jacking Mike's blog this week. As the Product Technical Specialist, Mike visits shops throughout the USA. Last month, he got stuck in the Northeast during one of many snow events that region has experienced. When he got back to the office, he told us about his trip and I thought it would be good information to share with his readers.

Read More

Interview with Hurco Co-Founder Mr. Roch (History of Hurco: Part 3)

Posted by Maggie Smith on Fri, Dec 06, 2013

If you're a regular reader, you're up to speed about the interview I conducted with Mr. Roch, co-founder of Hurco (you can scroll down to this week's video and skip the recap of Parts 1 and 2).

Read More

Tags: Mr. Roch, history of machining, Compu-cut, 2-axis shearing machine, Ed Humston, inventions, manufacturing history, Hurco History, Gerald Roch, inventor, entrepreneur, Indiana business

The History of Hurco: Part 2. An interview with Mr. Roch

Posted by Maggie Smith on Fri, Nov 08, 2013

Last week, I posted Part 1 of our History of Hurco video series, where we learned about all of the events—good and bad—that led Mr. Roch to start a business with his boss at the time, Ed Humston. Mr. Roch ended up working in sales for Ed Humston who owned E.L. Humston Company when he quit his job as an industrial engineer at EMPCO in protest of the company president’s, who he believed was making a number of missteps—and his father owned 30 percent of the company, which made the situation even more awkward.

Read More

Tags: Mr. Roch, history of Hurco, autobend, control technology

Happy Birthday Hurco - 45 years

Posted by Maggie Smith on Thu, Oct 31, 2013

I couldn't let the month of October end without acknowledging our 45th birthday...it was October of 1968 when Mr. Roch asked Mr. Humston if he wanted to start a shop. Hurco co-founder, Gerald V. Roch, inventor of CNC and conversational progamming, sat down with me so I could document our company's founding…and he didn't "sugarcoat" it. He talked about failed product launches, financial challenges, and the times he feared the company would fold. During the coming weeks, we will post different parts of the interview with Mr. Roch. To skip the blog article and go straight to the video, scroll to the bottom!

Read More

Tags: Hurco History, Gerald Roch, inventor, entrepreneur, Indiana business

Uncle Sam's Section 179 Tax Deduction for 2013

Posted by Maggie Smith on Thu, Oct 24, 2013

It's that time of year again...figuring out how to keep more of your money for your business. Our friends at Tech Financial sent us the latest information on this year's Section 179 Federal Income Tax Deduction...it's not as great as the 2011 Section 179, but it's still money in your pocket. REMEMBER, we are not accountants so please check with your accountant to confirm eligibility for tax benefits.

Read More

Tags: tax deduction, depreciation, section 179, IRS, federal income tax

Top Shops 2013: What's Their Secret?

Posted by Maggie Smith on Wed, Oct 02, 2013

Earlier this year, I reviewed the results from the Benchmarking Report by Modern Machine Shop called TOP SHOPS and promised to give you an update when the 2013 results were published. This blog post only touches on a fraction of the information contained in this incredibly extensive report—the Executive Summary alone is 22 pages—so I encourage you to explore Modern Machine Shop’s TOP SHOPS ZONE

Read More

Tags: 5-Axis Machining, Manufacturing Industry Insights, High Speed Machining

Top Shops: What’s Their Secret Sauce?

Posted by Maggie Smith on Tue, Jul 16, 2013

Hi Hurco Blog Readers. Mike Cope has been on the road quite a bit so I'm filling in as a guest writer for his blog.

Read More

Tags: Milling, Manufacturing Industry Insights, Turning