---
title: Manual Bar Pull On A Hurco CNC Lathe - Tips & Tricks
description: How to perform a manual bar pull on a CNC lathe without a bar feeder or a bar puller.
---

[Inside Hurco blog: news and event from CNC machine company ](https://blog.hurco.com/backstage-pass)

# [Manual Bar Pull On A Hurco CNC Lathe - Tips & Tricks](https://blog.hurco.com/backstage-pass/manual-bar-pull-on-a-hurco-cnc-lathe-tips-tricks)

 Written by [Zachary Lovelace](https://blog.hurco.com/backstage-pass/author/zachary-lovelace) | Mar 19, 2020 1:04:59 PM

At Hurco we know that not every machine shop has all the equipment that they really need to get by on a day to day basis. Some shops have rows upon rows of machines, while smaller shops may have one CNC mill, one CNC lathe and a couple bridgeports sitting in the corner. So we wanted to make life a little easier for our customers and machinists in genera.  

In this video Jason Falk discusses the topic of a "Manual Bar Pull" on a CNC lathe. If you have multiple parts to run without a bar feeder or a bar puller and don’t want to deal with part setup in between runs, this tutorial will show you how to set up your CNC lathe to do a "Manual Bar Pull" operation to speed up the process.

For more information on Hurco's broad range of CNC machines feel free to visit [www.hurco.com ](http://www.hurco.com)

Hurco TM6i CNC Lathe - [TM Series Page](https://www.hurco.com/en-us/products/lathes/Pages/TM-cnc-lathe-machine.aspx)

Travel: 7x, 14z in

Max. Turning Dia: 12.4 in

Max. Turning Length: 13.4 in

Max. Bar Capacity: 1.75 in

Spindle: 6k, 84 ft-lbs @ 1090

[View full post](https://blog.hurco.com/backstage-pass/manual-bar-pull-on-a-hurco-cnc-lathe-tips-tricks)

```json
{
  "@context" : "http://schema.org",
  "@type" : "BlogPosting",
  "author" : {
    "@type" : "Person",
    "name" : "Zachary Lovelace"
  },
  "dateModified" : "2020-03-19T13:04:59.199Z",
  "datePublished" : "2020-03-19T13:04:59Z",
  "headline" : "Manual Bar Pull On A Hurco CNC Lathe - Tips & Tricks",
  "image" : {
    "@type" : "ImageObject",
    "height" : 720,
    "url" : "https://cdn2.hubspot.net/hubfs/209468/youtube%20%281%29.png",
    "width" : 1280
  },
  "mainEntityOfPage" : "https://blog.hurco.com/backstage-pass/manual-bar-pull-on-a-hurco-cnc-lathe-tips-tricks",
  "publisher" : {
    "@type" : "Organization",
    "logo" : {
      "@type" : "ImageObject",
      "height" : 60,
      "url" : "/hs/hsstatic/content_shared_assets/static-1.4092/img/default-amp-logo.png",
      "width" : 60
    },
    "name" : "Inside Hurco blog: news and events from CNC machine company"
  }
}
```