CNC Machining Blog - Tips and Tricks for Machinists

On a regular basis I am asked to explain something pertaining to live-tool machining on a lathe, or "mill-turn," as it is commonly referred to in the industry. Even people with a CNC turning background are sometimes a little confused, especially in the areas of tooling and when the use of an additional Y-axis is necessary.

In this article, I will shine some light on the basics of live-tool machining and the application of the optional Y-axis.

It is possible to drill very deep holes, even small diameter holes, without the need for pecking cycles and in half the cycle time thanks to some really cool science that goes way over my head. Although this technology doesn’t apply solely to hole drilling, it seems to be the area with the biggest impact.

​Hello, and welcome to the Hurco blog. I will be updating and posting something new each week on a variety of different subject matter: high-speed and 5-axis machining, workholding, the latest control technologies, and Hurco tips-and-tricks…just to name a few.